As for wooden material such as the MDF plate, it is effective to raise the processing speed and increase the number of processing because the laser tend to burn the material when the heating power of the laser is high.
We have a result for each material under the parameter with high speed and extra number of processing times.
*The results might differ from the result on this page when the composition of the MDF is different from the ones we used.
*The focus of the laser is set to radiate in the middle of the material when we process a material thicker than 5mm.
FABOOL Laser Mini 1.6W
1mm*
Head Speed (mm/min) |
Laser Power (%) |
Times |
Data Size |
100 |
100% |
10 |
35×35mm |
*This time we only have the results with the processing time parameter being “lower than 10 times” on this page. The laser can also cut 2.5mm thick MDF plate if you increase the processing times.
FABOOL Laser Mini 3.5W
1mm
Head Speed (mm/min) |
Laser Power (%) |
Times |
Data Size |
300 |
100% |
7 |
35×35mm |
2.5mm
Head Speed (mm/min) |
Laser Power (%) |
Times |
Data Size |
300 |
100% |
10 |
35×35mm |
FABOOL Laser CO2
1mm
Head Speed (mm/min) |
Laser Power (%) |
Times |
Data Size |
5000 |
100% |
1 |
35×35mm |
2.5mm
Head Speed (mm/min) |
Laser Power (%) |
Times |
Data Size |
2300 |
100% |
2 |
35×35mm |
5.5mm
Head Speed (mm/min) |
Laser Power (%) |
Times |
Data Size |
1000 |
100% |
3 |
35×35mm |
9mm
Head Speed (mm/min) |
Laser Power (%) |
Times |
Data Size |
800 |
100% |
4 |
35×35mm |
12mm
Head Speed (mm/min) |
Laser Power (%) |
Times |
Data Size |
550 |
100% |
5 |
35×35mm |
FABOOL Laser DS
1mm*
Head Speed (mm/min) |
Laser Power (%) |
Times |
Data Size |
4500 |
100% |
1 |
35×35mm |
*The speed is lower than the FABOOL Laser CO2 because the laser head of FABOOL Laser DS will not move as fast as the CO2 laser.
2.5mm
Head Speed (mm/min) |
Laser Power (%) |
Times |
Data Size |
3600 |
100% |
2 |
35×35mm |
5.5mm
Head Speed (mm/min) |
Laser Power (%) |
Times |
Data Size |
1600 |
100% |
3 |
35×35mm |
9mm
Head Speed (mm/min) |
Laser Power (%) |
Times |
Data Size |
1400 |
100% |
4 |
35×35mm |
12mm
Head Speed (mm/min) |
Laser Power (%) |
Times |
Data Size |
900 |
100% |
5 |
35×35mm |

This is the image to show the comparison of each material’s thickness.
There are 1mm/ 2.5mm/ 5.5mm/ 9mm/ 12mm thick piece of MDF from the left.
Comments
0 comments
Please sign in to leave a comment.